WCS: Select the world coordinate system as a reference to create your new coordinate system in Siemens NX®.Ībsolute-Displayed Part: You could select an absolute point of the part as a reference for your new coordinate system in Siemens NX®. The placement of the new coordinate system will be done according to the selected reference. Selecting a Reference Point for Coordinate SystemĪlso, you select the reference point of your new coordinate system as in the green box in Siemens NX®. Three Planes: You could select three planes in the drawing scheme in Siemens NX® to create your coordinate system.Ībsolute CSYS: You can create a coordinate system in absolute point. The plane, Y-Axis, Point: You could define your new coordinate system’s place by selecting a plane, the orientation of Y-Axis by selecting an edge or line and a point to place your coordinate system in Siemens NX®. Plane, X-Axis, Point: You could define your new coordinate system’s place by selecting a plane, the orientation of X-Axis by selecting an edge or line, and a point to place your coordinate system in Siemens NX®. And you select the center of your new coordinate system in Siemens NX®. There are 110 zones in the continental US, with 10 more in Alaska, 5 in Hawaii, and one. Each state contains one or more state plane zones, the boundaries of which usually follow county lines. Z-Axis, Y-Axis, and Origin: You could select the Z and Y orientations of the new coordinate system by selecting lines or edges for them individually. The State Plane Coordinate System (SPS or SPCS) is a set of 126 geographic zones or coordinate systems designed for specific regions of the United States. Even if you turn on the import properties you need to dell DM which coordinate systems you. For DesignModeler, there is an extra step. DSN station, rover) »Spacecraft Associated with the main spacecraft structure. planets, satellites) »Topocentric Associated with an object on or near the surface of a natural body (e.g. And you select the center of your new coordinate system in Siemens NX®. In workbench you can import those coordinate systems into ANSYS Mechanical by clicking Import Coordinate Systems from the Advanced Geometry Options properties for the Geometry cell in you systems. Navigation and Ancillary Information Facility NIF Frames and Coordinate Systems Non-Inertial Accelerating, including by rotation Examples ✻ody-fixed Associated with a natural body (e.g. Z-Axis, X-Axis, and Origin: You could select the Z and X orientations of the new coordinate system by selecting lines or edges for them individually.
0 kommentar(er)
